STAGE 21

 Return to the BUILD


“In this assembly session, you will attach the front platform to the front section of the chassis.”

Contents


Parts

Assembly Guide (Digital Version)

Build


Assembling the Front Platform

Stage 21.1

Retrieve the Front Chassis assembly from the previous stage and turn it upside down. Align the posts of the Left and Right Bank Exhaust Pipes to these holes of the Front Platform:

At the same time, align these four holes of the Front Platform to the matching holes in the rear beam of the Front Chassis assembly:

Stage 21.2

Turn the entire assembly over again and secure the two Exhaust Pipes to the Front Platform with two (2) AP screws:

Stage 21.3

Secure the Front Platform to the Front Chassis assembly with six (6) AM screws (three on each side).

This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:

Thoughts


MOM:  I am elated we finally received the next issues!!!   The Front Platform is metal.

Place this chassis assembly safely aside as it will not be needed again until Stage 26.

Running Total of screws used so far: 251

Next Up


 Stage 22 – Left Panel (Engine Bay)

Leave a Reply

Your email address will not be published. Required fields are marked *

Building the 1:8 scale Dodge Charger R/T from DeAgostini