Return to the BUILD
“In this assembly session you will continue to assemble the engine housing, which is the area under the bonnet that contains the engine of your model.”
Assembling the Engine Housing Part II
Like in the last stage, align the three tabs of Right Panel 1 to these holes of Right Panel 2 and secure these parts together with three (3) AM screws. DeAgostini recommends starting with the center screw to distribute the pressure evenly across the parts.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
MOM: A rinse and repeat of the last stage! In this stage, all parts are metal.
This assembly can be stored until we need it again in Stage 26.
Stage 24 – Battery/Tray/Clamps/Posts/Cables