STAGE 33

 Return to the BUILD


“In this session you will go back to working on the exhaust pipe. In particular, you will be installing the rear components.”

 

Contents


Parts

Assembly Guide (Digital Version)

Build


Assembling the Exhaust Pipe II

Stage 33.1

Fit the rounded end of a Mount Bracket 1 (the shorter ones) to this location on the Rear Left Exhaust Pipe (Piece 1) as shown, and secure into place with one (1) AP screw.

Make sure you use the correct Rear Left Exhaust Pipe (Piece 1) here. The pipes have different bends and hole positions to identify them:

Stage 33.2

Attach the Left Tail Pipe (marked ‘L’) to the straight end of the Rear Left Exhaust Pipe (Piece 1) as shown, using one (1) EP screw. Fit the rounded end of a Mount Bracket 2 (the longer ones) to this location on the Rear Left Exhaust Pipe (Piece 1) as shown, and secure into place with one (1) AP screw:

Stage 33.3

Secure the Rear Left Exhaust Pipe (Piece 2) to your existing Rear Left Exhaust Pipe (Piece 1) with four (4) AP screws, as shown.

The correct Rear Left Exhaust Pipe (Piece 2) is the one with the tab/hole on the end:

Stage 33.4

We will complete the right side exhaust pipe in the same way. Fit the rounded end of a Mount Bracket 1 (the shorter one) to this location on the Rear Right Exhaust Pipe (Piece 2) as shown, and secure into place with one (1) AP screw:

Stage 33.5

Attach the Right Tail Pipe (marked ‘R’) to the straight end of the Rear Right Exhaust Pipe (Piece 2) as shown, using one (1) EP screw. Fit the rounded end of a Mount Bracket 2 (the longer one) to this location on the Rear Right Exhaust Pipe (Piece 2) as shown, and secure into place with one (1) AP screw:

Stage 33.6

Secure the Rear Right Exhaust Pipe (Piece 1) to your existing Rear Right Exhaust Pipe (Piece 2) with four (4) AP screws, as shown:

Thoughts


Make sure to pay attention to the correct parts here as it can get confusing. These parts are all plastic.

Next Up


 Stage 34 – Mufflers, Rear Brake Hose/Guide

Leave a Reply

Your email address will not be published. Required fields are marked *

Building the 1:8 scale Dodge Charger R/T from DeAgostini