STAGE 71

 Return to the BUILD


“In this assembly session you will mount the rearview mirror and the interior panels on the front mounting
brackets.

 

Contents


Parts

Materials: The Rearview Mirror Arm is metal, but the rest of these parts are plastic.

Assembly Guide (Digital Version)

Build


Rearview Mirror and Internal Panels

Stage 71.1

Fit the curved end of the Rearview Mirror Arm to the hole on the back of the Rearview Mirror Housing, as shown:

Secure these parts together with one (1) CM screw.

This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:

Stage 71.2

Peel the Rearview Mirror sticker from the backing paper and stick it into the matching opening of the Rearview Mirror Housing, as shown:

Stage 71.3

Retrieve your Body assembly from the previous stage and turn it upside down on a soft cloth. Fit the Left Front Interior Panel (marked ‘L’) to this location inside the left-side A-pillar, as shown:

Stage 71.4

Align the holes, then secure the Left Front Interior Panel to the Middle Section of the Body from the outside with one (1) BP screw, as shown:

Stage 71.5

In the same way, fit the Right Front Interior Panel (marked ‘R’) to this location inside the right-side A-pillar, as shown:

Stage 71.6

Align the holes, then secure the Right Front Interior Panel to the Middle Section of the Body from the outside with one (1) more BP screw:

Thoughts


We did not install the Rearview Mirror assembly yet, so keep it safe until the next stage.

Next Up


 Stage 72 – Roof Frame

Leave a Reply

Your email address will not be published. Required fields are marked *