Return to the BUILD
“In this assembly session you will continue to work on the right door.“
The steps to build this right door will be almost identical to the Left Door we just built.
Materials: While the Inner Frame of the Right Door is plastic, the rest of these parts are metal.
Mounting the Right Door (I)
Retrieve your Right Door assembly from the previous stage. Fit the Inner Frame of the Right Door to the interior of the Right Door as shown, align the screw holes, and secure the Inner Frame to the Right Door with four (4) AM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Fit the rounded end of the Top Hinge (Part 2) between the rounded tabs of Top Hinge (Part 1), aligning the screw holes. Then, secure these together with one (1) TM screw, as shown:
Fit the Top Hinge assembly to this upper location inside the Right Door and secure it into place with two (2) AM screws, as shown:
Fit the rounded tabs of Bottom Hinge (Part 2) between the rounded tabs of Bottom Hinge (Part 1), align the holes, and secure them together with one (1) UM screw, as shown:
Fit this Bottom Hinge assembly to this lower location inside the Right Door and secure it into place with two (2) AM screws, as shown:
Retrieve your Body assembly from the previous stage. Secure the Hinge Mount Plate to this location in front of the right-side door opening using three (3) AM screws, as shown:
As before, we are building up the Right Door so it can be attached to the car. The steps should feel very familiar!
Stage 90 – Right Door Inner Section, Lock, Lock Stem/Spring/Mount Bracket