Return to the BUILD
“In this assembly session you will be working on the right door window.“
Materials: All of these parts are plastic.
The Right Door Window (I)
Retrieve your Right Door assembly from Stage 89. Fit the Chrome Guide to the inner top edge of the Right Door as shown, and secure it to the Right Door from the inside with four (4) CM screws.
Be gentle with this Chrome Guide as the upright pieces could be easily bent or broken. This is also your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Retrieve your Right Door Inner assembly from the previous stage. Fit the Chrome Deflector Trim to this location on the inside of the Right Door Inner, as shown. Secure it into place along the bottom edge with two (2) TP screws:
From the other side of this Right Door Inner assembly, further secure the Chrome Deflector Trim with two (2) more TP screws, as shown:
Like the left side we already completed, insert the keyed post of the Deflector Knob into the matching recess of the Deflector Glass.
Make sure the ‘pin’ of the Deflector Knob is aligned to the long ‘pin’ of the Deflector Glass, like this:
Secure the Deflector Knob into place from the other side with one (1) SP screw:
Fit this Deflector Glass assembly into the inside of the matching opening of the Right Door Inner, sliding the Deflector Knob pin into the hole of the Chrome Deflector Trim and aligning the Deflector Glass pin into this notch, as shown:
Fit the Deflector Mount Bracket over this lower pin and secure it into place with one (1) DP screw, as shown:
With this final screw installed, we should be able to gently open and close the Deflector Glass:
This door is coming together quite well and exactly the same as the previous door (minus a wing mirror, of course).
Stage 93 – Right Door Window Glass/Weatherstrips, Window Crank/Cogs/Knob, Window Regulator Cover Plate