Return to the BUILD
“In this assembly session you will install the now completed right door on your model.“
Contents
Parts
Materials: The two Bonnet Mount Brackets are metal, but the rest of these parts are plastic.
Build
Installing the Right Door
Stage 94.1
Retrieve your Body assembly from Stage 88 and your Right Door assembly from the previous stage. Fit the Right Door into the right-side door opening of the Body, as shown.
I aligned the Right Door to the door opening first and taped it in place to keep it straight:
Stage 94.2
Secure the two Hinge tabs to the Body with two (2) SM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
With these screws tightened, make sure your door opens and closes as expected:
Stage 94.3
Fit the Front Right Bonnet Mount Bracket to the right front corner of the Front Body Section, as shown:
Secure the Front Right Bonnet Mount Bracket to the Front Body Section with two (2) AM screws:
Stage 94.4
In the same way, fit the Front Left Bonnet Mount Bracket to the left front corner of the Front Body Section, as shown:
Secure the Front Left Bonnet Mount Bracket to the Front Body Section with two (2) AM screws:
Thoughts
Happily, both doors are now installed and working as expected! We have also started work on the front end of our Charger R/T with the Bonnet (Hood) mount brackets. The six unused Front Indicator parts will be used in the next two stages, so keep them nearby.
Next Up
Stage 95 – Front Left Wheel Arch